Concrete Bull Float in Pune
The flatness of a slab is won in its first ten minutes, and the tool that wins it is the bull float. If you need a concrete bull float in Pune, Jamshedji Constro Equip manufactures both the stainless-steel and aluminum models at MIDC Bhosari — 1200 mm blades, 5.4 metres of handle reach, at the factory gate price. Browse our full range of concrete bull floats.
Why the float pass matters on Pune's pours
Every slab poured across this district — tower floors in Kharadi and Punawale, warehouse beds in Chakan and Ranjangaon, podium tops in Hinjawadi, the pavements following PCMC's road works — goes through the same critical minutes after screeding. Ridges from the screed board, low spots, coarse aggregate sitting proud: if these set into the surface, no power trowel later can fully rescue the flatness, and industrial floors get measured for exactly that.
The bull float is the answer — a wide, long-reach blade drawn across the fresh surface to knock down the highs, fill the lows and float paste to the top while the concrete is still plastic. Finishing crews in Pune treat it as the non-negotiable first pass; the trowel only polishes what the float has already made flat.
Models and factory prices in Pune
Both models ex-works Bhosari at the same price — pick by working style.
Bull Float - Stainless Steel
- 1200x300mm blade - 1.8m handles x3
₹9,440 onwards
View Details → 💬 Get Pune Quote
| Model | Blade | Best for | Factory price |
|---|---|---|---|
| Stainless Steel | 1200 x 300 mm | Industrial pours, harder working edge | ₹9,440 |
| Aluminum | 1200 x 200 mm | All-day use, residential & mid-size slabs | ₹9,440 |
Tell us your slab sizes — or come handle both models at the works.
WhatsApp Us Call +91 84840 61252
Stainless or aluminum — an honest comparison
Both share the 1200 mm blade width and the three-section 1.8 m handle system reaching about 5.4 metres. The stainless model carries a wider (300 mm) and tougher blade — it holds its edge through the abuse of big industrial pours, and its extra weight helps it plane stiff mixes flat. The aluminum model is the endurance choice: narrower (200 mm), markedly lighter, and far kinder to a finisher's shoulders on the third pour of the week. Crews doing Chakan-scale industrial beds tend stainless; residential and society-slab contractors tend aluminum. At the same ₹9,440, buy the one your crew will still be swinging happily at five in the evening.
Float technique that shows in the finish
Work the float immediately behind the screed, before bleed water sheets the surface — floating on bleed water traps it and weakens the top layer. Tilt the leading edge slightly on the push, reverse the tilt on the pull, and overlap each pass by a third of the blade. Two directions at right angles beat repeated passes in one. And clean the blade the moment the pour ends: dried laitance on tomorrow's float prints into tomorrow's slab. Pair the float with a power trowel for the burnish and a texture brush where grip is specified, and the whole finishing chain comes from one factory in Bhosari.
Why Pune buys direct from Jamshedji
- The machine is built here. Our works at MIDC Bhosari have been manufacturing construction machinery since 1983 — when you buy in Pune, you are buying at the source, with no dealer or transporter in between.
- Service is a phone call, not a courier. Our technicians and full spare-parts stock sit in Bhosari; most Pune breakdowns are resolved within a day.
- ISO 9001:2015 certified, Udyam/MSME registered — with a proper GST invoice (GSTIN: 27AACCJ5154F1ZO) so registered contractors claim full input tax credit.
- Handle both at the works. Weight and balance decide this tool — pick both up at Bhosari and the right one chooses itself.
- Trusted by 5,000+ buyers across India — and exported to UAE, Kenya, Bangladesh, Tanzania and Nepal. What ships abroad is what you buy at the gate.
Delivery anywhere in Pune — usually same or next day
Because we manufacture at MIDC Bhosari, delivery inside Pune and PCMC is measured in hours, not days. Our own transport covers Bhosari, Pimpri, Chinchwad, Chakan, Talegaon, Hinjawadi, Wakad, Baner, Aundh, Kothrud, Hadapsar, Kharadi, Wagholi, Katraj and the Ranjangaon belt — and if your site sits along the new ring-road corridors or out toward Shirur or Baramati, we schedule dispatch the same week. No inter-state transporter, no transit damage claims, no waiting a week for a machine that is built twenty minutes from your site.
Frequently asked questions
What is the price of a concrete bull float in Pune?
₹9,440 ex-works Bhosari for either model — stainless steel (1200x300 mm blade) or aluminum (1200x200 mm), each with three 1.8 m handle sections. GST invoice included.
Stainless steel or aluminum bull float?
Stainless for durability and a harder working edge on big industrial pours; aluminum for lightness when the float is swung all day on residential and mid-size slabs. Same price — the choice is working style, not budget.
What does a bull float actually do?
Immediately after screeding, the bull float's wide blade knocks down ridges, fills voids and brings paste to the surface across the open slab — the step that sets up a flat, closed surface for the power trowel later.
How far does it reach?
Three 1.8 m handle sections give roughly 5.4 m of reach — enough to float the middle of most Pune residential and commercial pours from the slab edge.
Delivery in Pune?
Same or next day, or collect from the Bhosari gate along with your trowel blades and other consumables.
GST invoice?
Yes — full GST invoice (GSTIN: 27AACCJ5154F1ZO) on every tool.
Complete the finishing kit: power trowel, texture brush, groove cutter — or call +91 84840 61252 and handle both floats at Bhosari.
Other Construction Equipment in Pune
- Bar Bending Machine in Pune
- Bar Cutting Machine in Pune
- Bar Threading Machine in Pune
- Concrete Cutter in Pune
- Concrete Texture Brush in Pune
- Plate Compactor in Pune
- Power Trowel in Pune
- Tamping Rammer in Pune
- Walk Behind Roller in Pune
Concrete Bull Float in Other Cities
We also supply and deliver concrete bull floats to contractors in Mumbai, Nashik and Sambhajinagar — same factory-direct pricing with GST invoice, dispatched from our Pune facility.
Need to add texture lines to your concrete slab as well? View our matching Concrete Texture Brush in Pune.