Welding Machine X-Bravo – 250A ARC Inverter, Dual Voltage

The X-Bravo is a 250 A ARC (stick/MMA) inverter welding machine with dual-voltage 220 V / 380 V input, so it runs on either single-phase or three-phase supply. It sits toward the top of the Jamshedji ARC welder range — high welding current for heavy fabrication, while still able to run off a single-phase socket where three-phase power is not available. 5PCB inverter design.

Key specifications at a glance

• Welding current: 250 A
• Input voltage: 220 V / 380 V (dual use)
• Phase: single or three phase
• Process: ARC / MMA (stick)
• Board: 5PCB inverter design

How to choose a welding machine by amperage

An ARC welder is chosen mainly on one number: the welding current it can put out. That current sets how thick a section you can weld and how large an electrode you can run. More amperage lets you burn a bigger rod and drive heat deeper into thick steel; less amperage is easier to control on thin material and draws less power. Every machine in this range does the same job — manual metal arc welding on steel, and other metals — and the choice between them is how much current you need and what power supply you have.

At 250 A the X-Bravo handles heavy fabrication and thicker structural sections with larger electrodes, and sustains longer welds on demanding joints. What sets it apart from the higher-current ARC 400 and 300 XL is that it keeps the dual 220 V / 380 V input — so you get high welding current without being tied to a three-phase-only or single-phase-only supply.

Which welder in the range

The whole range is ARC welding machines; pick by welding current and the power you have.

• 300 X-Bravo — 180 A, 220/380 V: general fabrication, repair and site work; single or three phase.
• ARC 322 — 220 A, 220/380 V: heavier sections; single or three phase.
• This X-Bravo — 250 A, 220/380 V: heavy fabrication with dual-voltage flexibility; single or three phase.
• ARC 400 — 270 A, 380 V three phase: heavy-duty industrial welding, three-phase only.
• 300 XL — 300 A, 220 V single phase: the highest current in the range on a single-phase supply.

Applications

Heavy steel fabrication, structural welding, industrial and construction work, fabrication shops and site work on steel, aluminium and other metals.

Full specifications

Buying, GST and delivery

• Supplied with a GST invoice (18% GST — CGST + SGST within Maharashtra, IGST interstate), ITC eligible
• Sold outright — Jamshedji Constro Equip does not rent or hire equipment
• Dispatched F.O.R. Pune to sites across India, plus export to Bangladesh, UAE, Kenya, Tanzania, Sri Lanka and Nepal
• Backed by a manufacturer founded in 1983, ISO 9001:2015 and MSME/Udyam registered, with 5,000+ clients

Frequently asked questions